Importancia, manejo y control de extraíbles e incrustaciones (pitch) en la fabricación de papel

Autores/as

  • Noé Aguilar Rivera Universidad Veracruzana. Facultad de Ciencias Biológicas y Agropecuarias

DOI:

https://doi.org/10.21829/myb.2004.1011281

Palabras clave:

Extraíbles, incrustaciones, papel y pulpa

Resumen

Se hace una descripción de los principales problemas relacionados con los extraíbles contenidos en las maderas destinadas a la producción de pulpa y papel. Estos compuestos de naturaleza orgánica son responsables de las incrustaciones en los equipos de pulpeo y blanqueo, incrementan la demanda de químicos, se dispersan en la pasta formando manchas o huecos en el papel y se encuentran presentes en el circuito de aguas blancas. Estos efectos pueden minimizarse evitando la cantidad de resinas que entran al proceso, instalando puntos de remoción o empleando especies no resinosas. Este trabajo hace una revisión de estos problemas y presenta algunas posibles soluciones para minimizar las incrustaciones al emplear la madera en la producción de pulpa y papel.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Noé Aguilar Rivera,

Universidad Veracruzana. Facultad de Ciencias Biológicas y Agropecuarias

Universidad Veracruzana. Facultad de Ciencias Biológicas y Agropecuarias. km 1 Carretera Peñuela-Amatlán de los Reyes s/n. Apdo. Postal 177. Córdoba, Veracruz, México

Citas

Allen, L.H.; B.B. Sithole y J.M. Macleod. 1991. The importance of seasoning and barking in the kraft pulping of aspen, J. Pulp Paper Sc. Vol. 17(3):J85-J91.

Barnett, D.J. y L. Grier. 1996. Mill closure forces focus on fines retention, foam control. Pulp & paper 70(4):89-95.

Blanchette, A.R. y T.L. Farell. 1992. Biological control of pitch in pulp and paper production by Ophiostoma piliferum. TAPPI Journal 75(12):102106.

Browning B.l. 1967. Methods of Wood Chemistry. Vol. 1. Interscience Publishers. Nueva York. 689 p.

Brush, S.T. y L.R. Farell. 1994. Biodegradation of wood extractives from southern yellow pine by Ophiostoma piliferum. TAPPI Journal 77(1):155-160.

Caperos, S.A. y S.A. Romero. 1991. Kinetics of wood extraction with solvents. TAPPI Journal 74(5):191196.

Fengel, D. y G. Wegener. 1989. Wood: Chemistry, Ultrastructure, Reactions. Walter de Gruyter. Berlin. 613 p.

Foster, C. y D. Rende. 1997. How recycling, water reuse impact chemistry. PIMA 79(1):48-53.

Gerhardus, C.S. 2002. Fungal pitch control in the Kraft pulping and bleaching of Eucalyptus spp. TAPPSA Journal 34-38.

Glazer, A.J. 1991. Overview of deposit control. TAPPI Journal 74(7):73-77.

Jansson, B.M. y P. Wormald. 1995. Reactions of wood extractives during ECF and TCF bleaching of kraft pulps. Pulp & paper Canada 96(4):42-45.

Karlberg, A.T. 1991. Air oxidation increases the allergenic potential of tall oil rosin. Colophony contact allergens also identified in tall oil resin. Am. J. Contact Dermatitis 2:43-49. DOI: https://doi.org/10.1097/01206501-199103000-00009

Lloyd, A.J. y A.N. Deacon. 1991. The influence of pulping and washing conditions on the resins content of radiata pine mechanical pulps. APPITA Journal 43(6):427-432.

Lee, K.H. y M. Summimoto. 1991. Pitch problems in pulping and bleaching of sarawak hardwood. Part 4. An efficient method of resin speck removal from Dipterocarpaceae pulps. APPITA Journal 44(3):201-204.

Nelson, P.J.; W.J. Chin y J.P. Mulcahy. 1998 . Removal of extractives during TCF bleaching of radiata pine bisul-fite pulp. Proceedings APPITA 98. p:347-352.

Ohtani, Y. 1993. Utilization of carbon fibres for quantitative estimation and removal of pitch from the papermaking system. APPITA Journal 46(1):38-43.

Ohtani, Y. y T. Shigemoto. 1991.Chemical aspects of pitch deposits from japanese pulp and paper mills. APPITA Journal 44(1):29-32.

Sanjuán D., R. 1997. Obtención de pulpas y propiedades de las fibras para papel. Edit. Ágata. México. 293 p.

Sierra, C.A. y S.A. Romero. 1990. Extraction of wood with solvents. TAPPI Journal 73(11):221-224.

Sithole B., B. y L. Allen. 2003. The effects of wood extractives on system closure. http://www.tappsa.co.za.

Sjöstrom, E. 1993. Wood Chemistry: Fundamentals and aplications. 2 a ed. Academic Press, Inc. San Diego, CA. 189 p.

Ström, G.; P. Stenius; M. Lindström y L. Ödberg. 1990. Surface chemical aspects of the behaviour of soaps in pulp washing. Nord. Pulp Paper J. 5(1):44-51. DOI: https://doi.org/10.3183/npprj-1990-05-01-p044-051

TAPPI (Technical association of the pulp and paper industries). 2000. TAPPI Test Methods 2000-2001. Atlanta GA EUA.

Wallis A., F.A. y R.H. Wearne. 1999. Analysis of resin in eucalypt woods and pulps. APPITA Journal 52:295299.

Wiik, K. 1997. Odour analysis of paper. Part II. A case study of the odour analysis and abatement. Proceedings, Process and Product Quality Conference and Trade Fair.TAPPI PRESS, p:11-17.

Descargas

Publicado

2016-09-01

Cómo citar

Aguilar Rivera, N. (2016). Importancia, manejo y control de extraíbles e incrustaciones (pitch) en la fabricación de papel. Madera Y Bosques, 10(1), 89–99. https://doi.org/10.21829/myb.2004.1011281
Metrics
Vistas/Descargas
  • Resumen
    1127
  • PDF
    312

Número

Sección

Revisiones bibliográficas

Métrica