Surface quality of the Ficus sp. wood veneers submitted to finishing treatments
DOI:
https://doi.org/10.21829/myb.2017.2321224Palavras-chave:
contact angle, CIELab, colorimetry, wettability, wood, roughnessResumo
The objective of this investigation was to evaluate the roughness, wettability and the surface color of Ficus sp. genus before and after the process of manual sanding and application of a finishing product (stain). The roughness and color were determined before and after the sanding process and after applying the stain using Surftest SJ 400 Mitutoyo and ColorEye XTH spectrophotometer. The wettability was evaluated by measuring the contact angle between the water drop and the surface of the veneers, using a goniometer Krüss DSA30. The roughness of the veneers, subjected to 180, 240, and 320 sandpaper, decreased after the sanding process and remarkably after stain application. The contact angle was over 90° for all treated samples. Regarding the colorimetry, there was a decrease in L* average values after sanding. After applying the stain, there was a change in color of the wood, from grayish-white to yellow-olive.
Downloads
Referências
Associação Brasileira de Normas Técnicas (2002). ABNT-NBR ISO 4287 Especificações geométricas do produto (GPS) - Rugosidade: Método do perfil - Termos, definições e parâmetros da rugosidade. Rio de Janeiro, Brazil: ABNT.
Berg, J. C. (1993). Role of acid-base interactions in wetting and related phenomena. In J. C. Berg (Org.). Wettability (pp. 75-148). New York: Marcel Dekker. DOI: https://doi.org/10.3183/npprj-1993-08-01-p075-085
Berg, C. C. and Vilaviccencio, X. (2004). Taxonomic studies on Ficus (Moraceae) in the West Indies, extra-Amazonian Brazil and Bolivia. Ilicifolia, 5, 1-177.
Burdurlu, E., Usta, I., Ulupinar, M., Aksu, B. and Erarslan, Ç. (2005). The effect of the number of blades and grain size of abrasives in planning and sanding on the surface roughness of European black pine and Lombardy poplar. Turkish Journal of Agriculture & Forestry, 29, 315-321.
Camargos, J. A. A. (1999). Colorimetria aplicada na elaboração de uma tabela de cores para madeiras tropicais. Unpublished master thesis, University of Brasilia, Brasília, Brazil.
Camargos, J. A. A. and Gonçalez, J. C. (2001). A colorimetria aplicada como instrumento na elaboração de uma tabela de cores de madeira. Brasil Florestal, 71(4), 30 - 41.
Carvalho, L. (1990). Caracterisation physico-chimique de La surface Du Chêne donculé. Diplomado en estudios avanzados, Universidad de Nancy, Nancy Francia.
Coelho, C. (2005). Influence de l’Usina gedubois sur les caractéristiques objectives et sur la perception subjective de l’Aspect d’une finition. Unpublished doctoral dissertation, University of Porto, Porto, Portugal.
De la Rie, R. E. (1987). The influence of varnishes on the appearance of paintings. Studies in Conservation, 32(1), 1-13. doi: 10.2307/1506186 DOI: https://doi.org/10.1179/sic.1987.32.1.1
Gonçalez, J. C. (1993). Caracterization technologique de quatre espèces connues de laforêt amazonienne: anatomie, chimie, couleur, propriétés physiques mécaniques. Unpublished doctoral dissertation, Ministère de l’Agriculture et de La Pêche, Nancy, France.
Gonçalez, J. C., Félix, T. L. F., Gouveia, F. N., Camargos, J. A. A and Ribeiro, P. G. (2010). Efeito da radiação ultravioleta na cor da madeira de freijó (Cordia goeldiana Huber) após receber produtos de acabamentos. Ciência Florestal, 20(4), 657-664. doi: 10.5902/198050982424 DOI: https://doi.org/10.5902/198050982424
Gray, V. R. (1992). The wettability of wood. Forest Products Journal, 12(9), 452-461.
Hauptmann, M., Muller, U., Obersriebnig, M., Gindl-Altmutter, W., Beck, A. and Hansmann, C. (2013). The optical appearance of wood related to nanoscale surface roughness. BioResources, 8(3), 4038-4045. DOI: https://doi.org/10.15376/biores.8.3.4038-4045
Hikita, Y., Toyoda, T. and Azuma, M. (2001). Weathering testing of timber: discoloration. In Y. Imamura. High performance utilization of wood for outdoor uses (pp. 27-32). Kyoto: Press-Net.
Instituto de Pesquisas Tecnológicas do estado de São Paulo (2015). Informações sobre madeiras - Figueira.IPT, São Paulo. Retrieved from http://www.ipt.br/informacoes_madeiras3.php?madeira=63.
Jakub, S. and Martino, N. (2005). Wood surface roughnesswhat is it? Retrieved form http://www.boku.ac.at/physic/ coste35/Rosenheim/article/art_Sandak_COST_E35_ Rosenheim_2005.pdf.
Japanese Industrial Standards (2001). JIS. JIS B 0601: Geometrical Products Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters. Tokio: JIS.
Kilic, M., Hiziroglu, S. and Burdurlu, E. (2006). Effect of machining on surface roughness of wood. Building and Environment, 41(8), 1074-1078. DOI: https://doi.org/10.1016/j.buildenv.2005.05.008
Lavisci, P., Janin G. and Uzielli, L. (1989). Qualité du bois de six essences du maquis méditerranéen. Foret Mediterraneenne, Forêt Méditerranéenne, 9(1), 69-78.
Lopes, C. S. D., Nolasco, A. M., Tomazello Filho, M. and Dias, C.T.S (2014). Avaliação da rugosidade superficial da madeira de Eucalyptus sp. submetida ao fresamento periférico. Cerne, 20(3), 471-476. doi: 10.1590/010477602014 2003875 DOI: https://doi.org/10.1590/0104776020142003875
Lucas Filho, F. C. (2004). Análise da usinagem de madeiras visando a melhoria de processos em indústrias de móveis. Unpublished doctoral dissertation, Federal University of Santa Catarina, Florianópolis, Brazil.
Melo, O. R. R., Del Menezzi, C. H. S., Souza, M. R. and Stangerlin. D. M. (2013). Avaliação das propriedades físicas, químicas, mecânicas e de superfície de lâminas de Paricá (Schizolobium amazonicum Huber ex. Ducke). Floresta e Ambiente, 20(2), 238-249. doi: 10.4322/floram.2013.004. DOI: https://doi.org/10.4322/floram.2013.004
Myers, D. (1990). Surface, interfaces and colloids: principles and applications. New York: VCH.
Piao, C., Winandy, J. E., and Shupe, T. F. (2010). From hydrophilicity to hydrophobicity: a critical review: Part 1. Wettability and surface behavior. Wood and Fiber Science, 42(4), 490-510.
Scheikl, M. and Wålinder, M. (2001). Theory of Bonding. In C.-J. Johansson, T. Pizzi and M. van Leemput (Eds.). Wood Adhesion and Glued Products, State of the art Report (pp. 91-99). Retrieved from: http://users.teilar.gr/~mantanis/E13-Glued-Products.pdf
Teles, R. F. (2014). Ensaios não destrutivos para avaliar o desempenho de madeiras amazônicas tratadas quimicamente. Unpublished doctoral dissertation, University of Brasilia, DF, Brazil.
Teles, R. F. and Costa, A. F. (2014). Influência do intemperismo acelerado nas propriedades colorimétricas da madeira de Angelim pedra. Nativa, 2(2), 65-70. doi: 10.14583/23187670.v02n02a02 DOI: https://doi.org/10.14583/2318-7670.v02n02a02
Yildiz, S. (2002). Physical, mechanical, technological and chemical properties of beech and spruce wood treated by heating. Unpublished doctoral dissertation, Karadeniz Technical University, Trabzon.
Yuan, Y. and Lee, T. R. (2013). Contact angle and wetting properties. In: Bracco, G. and B. Holst (Eds.). Surface Sciences Thechniques (pp. 3-34). Berlin Heidelberg: Springer Series in Surface Sciences. DOI: https://doi.org/10.1007/978-3-642-34243-1_1
Downloads
Publicado
Como Citar
-
Resumo2291
-
PDF 562
-
HTML 312
Edição
Seção
Licença
Copyright (c) 2017 Madera y Bosques
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Madera y Bosques por Instituto de Ecología, A.C. se distribuye bajo una Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional.
